-
YCQ9E Automatic transfer switchGeneral
YCQ9E series automatic transfer switch, rated working curent 16A to 630A,to be used in pow- er systems for ensuring the continuity of the supply, by transfering a load between two power supply sources. The switch has three working posions of “Main ( I ) cosing”, “Standby ( II )
closing” and “Double-of (0)”, which can be used for fire-fighting linkage and infrequent con-
necion and disconnecion of power supply systems. Mainly used in hospitals, shopping malls, banks, chemical industy, metalurgy, high-rise buildings, military facilities and fire-fighting occa- sions where power failure is not allowed.
Standards: IEC 60947-6-1 -
YCQ9Ms Automatic transfer switchGeneral
YCQ9Ms series dual power automatic transfer switch is suitable for power supply system with AC 50/60Hz, rated working voltage AC400V, rated working current 800A and below.It is possible to select and switch between two power sources according to requirements, ensuring uninterrupted operation of key power sources. When one power supply has overvoltage, undervoltage or phase loss, it will automaticallyswitch to another power supply or start the generator.Built-in RS485 communication interface, communication protocol MODBUS-RTU, realize real-time data upload, remote data configuration and status monitoring, as well as remote control, telemetry, remote control and remote adjustment functions.Mainly used in hospitals, shopping malls, banks, hotels, high-rise buildings, fire protection and other places that do not allow long-term power outages with uninterrupted power supply required.1. Can work in the environment of -5°C~40°C2. The altitude of the installation site does not exceed 2000m3. When the highest temperature is +40°C, the relative humidity of the air should notexceed 50%4. Higher humidity is allowed at lower temperature, 20°C~90%Standard: IEC 60947-6-1 -
YCQ9 16A-630A PC class Automatic transfer switchYCQ9 series automatic transfer switch is suitable for AC 50Hz, rated working voltage AC400V, rated operating current up to 630A three-phase four-wire dual-circuit power supply grid, automatically connect one or several load circuits from one power supply to another to ensure load normal power supply of the circuit.This product is suitable for industrial, commercial, high-rise and residential buildings, etc.more important places.Standard: IEC 60947-6 -
YCQ9B-63 Automatic transfer switch（CB class)This series of Automatic transfer switch is suitable for AC 50Hz/60Hz, rated working voltage 230V/400V and below power distribution and control circuit.The current up to 63A. It is mainly used as the main switch of terminal electrical appliances, and can also be used to control various types of motors, low-power electrical appliances,lighting and other places.
Standard:IEC60947-6-1
-
YCQ9HB Automatic Transfer SwitchYCQ9HB ATS appliances are suitable for AC 50Hz, rated working voltage 400V and below,rated current 10A to 63A dual power supply system, the power supply system of the two power sources: common power supply (N) and standby power supply (R) at the same time detection, when the power supply occurs undervoltage, phase failure power supply failure that is, automatic switching from the abnormal power supply to the normal power supply (can also be manually switched), to enhance the continuity and reliability of the power supply system in the use of the premises. This improves the continuity, safety and reliability of the power supply system at the place of use.Switching appliances are widely used in power systems, hospitals, postal and telecommuni cation, fire fighting, hotels, banks, airports, wharves, residential neighborhoods, TV stations, military facilities, shopping malls and other important places where the continuity of power supply is required.Standards: IEC 60947-6-1. -
YCQ1F series excitation type Automatic Transfer Switch (ATS)The YCQ1F series automatic transfer switch consists of a load isolation switch (without overload and short-circuit protection mechanism) and an intelligentcontroller. The switch adopts an excitation type transfer mechanism, which provides faster switching speed.It also employs a new microcomputer control system for intelligent monitoring and control, strong electromagnetic compatibility, long-term continuous operation, and stability and reliability.The split-type product can be equipped with an LCD display controller, which is easy to operate, has clear indications, and provides a user-friendly human-machine interface. -
Automatic Transfer Switch ATS YCQ61. YCQ6 series automatic transfer switch is applicable in AC50/60Hz, rated voltage of AC400V, and distribution the rated current from 16A to 3200A. In motor network, there is a primary and standby power, or as the utility to generator in loading changeover. Meanwhile, it used to insulate in unfrequent connection break circuit as the standby power.2. This products are widely used in hospitals, banks, high-rise architecture and so on where are very important places with no electric failure allowed for power supply, distribution andautomatic system.PS: when using bridge type connection, please instruct if it applies to the lineendor the outlet end.Standard:lEC 60947-6-1 -
YCQ4E/YCQ4R PC type Automatic Transfer SwitchThe dual power automatic switch is a newly developed miniature household power switch,which is mainly used to test whether the main power supply orstandby power supply is normal.When the normal power supply is abnormal, the standby power supply starts to work immediately,which ensures thecontinuity,rel iabi l ity and safety of power supply,This product is special ly designed for household rail installation and is specially used for Pz30 distribution box. -
YCQ1B Automatic Transfer SwitchProduct Overview
The dual power automatic switch is used to switch between two power sources. It is divided into common power supply and standby power supply. When the common power supply is powered off, the standby power supply is used. When the common power supply is called, the common power supply is restored), if you do not need automatic switching in special circumstances, you can also set it to manual switching (this type of manual / automatic dual-use, arbitrary adjustment).
-
ATS220 ControllerGeneral
ATS220 is one controller with YCQ4 ATS system of Mains and genset power,which can
control the YCQ4 ATS switch by auto or manual mode to apply for mains and gens power.It is with 4 digits LED tube which can display the single-phase gens voltage, gens frequency, mains voltage, mains frequency. YCQ4 ATS switch working status can be also shown by
LED.
All the parameters can be set through the front face buttons or PC port.
-
-
-
Address：No. 146-148 Xinguang Avenue, Xinguang Industrial Zone, Liushi Town, Yueqing, Wenzhou, Zhejiang, China
Hot Products - TOP BLOG - TOP SEARCH
-
Send Email
-
Whatsapp
-
Top