JDJ Voltage Transformer
-
Product Overview
-
Product Details
-
Data Download
-
Related Products
JDJ Voltage Transformer
Picture
JDJ Voltage Transformer
1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
Contact Us
Product Details
Leave Your Message
Write your message here and send it to us
Related Products
-
JSJW Voltage Transformer -
GW1-24 Isolation SwitchSelection Operating conditions The altitude above sea level: 2000m The ambient air temperature: -40℃~40℃ wind speed does not exceed 35m/s. The earthquake intensity does not exceed 8 degrees. The working situation is without frequent violent vibration. The installation site of ordinary type isolator should be kept away from gas,smoke chemical deposition, salt-spray fog, dust and other explosive and corrosive maters that affe... -
VS1i-12 Intelligent Vacuum Circuit BreakerType designation Operating conditions 1. Ambient Temperature: Maximum temperature: +40ºC, with an average not exceeding 35ºC within 24 hours, Minimum temperature: -20ºC. 2. Relative Humidity: Daily average relative humidity: ≤95%, Monthly average relative humidity: ≤90%, Daily average vapor pressure: ≤2.2 kPa, Monthly average vapor pressure: ≤1.8 kPa. 3. Altitude: Not exceeding 2000m. 4. Seismic Intensity: Not exceeding 8 degrees. 5. The surrounding air is not si... -
JN15-12 Indoor Grounding Switch● JN15-12/31.5 series indoor earthing switch is a new design and improved product of our company according to the ES1 type, suitable with electric power system with 3- 12KV, Three-phase, AC 50(60)Hz, support with various kinds of HV switchgear and as earthing protection. ● Standard: IEC 129,IEC 62271-102. Selection Operating conditions 1. Ambient temperature:-10~+40℃ 2. Altitude: ≤1000m (sensor height:140mm) 3. Relative humidity: Day average relative humidity ≤95% M... -
JDZC Voltage TransformerJDZC-6,10 type voltage transformer is the indoor device of epoxy resin cast insulation,applied to electric measurement and electric protection in the electric system of rated frequency 50Hz and rated voltage 10kV. Standard:IEC 61869-3 Selection Structure This transformer is the type of full insulation, its primary winding two terminals that are checked according to full insulation level, distributd on both sides of casting body top. It is mainly made up of three part; iron core, secondary... -
FN AC High-voltage Load SwitchFN7-12R(L) AC MV load switch used in 50Hz, 12kV three phase AC power system.FN7-12R(L) series vacuum circuit breaker is indoor high voltage switch-gear with rated voltage 12kV, three-phase AC 50Hz,which is developed by introducing from Switzerland, ABB corporation technology and analyzing domestic profession development condition, productivity development manufacture product. The overall structure of this product is formed with the switch main body and operating de...
Official shop
Follow us
-
-
-
Address：No. 146-148 Xinguang Avenue, Xinguang Industrial Zone, Liushi Town, Yueqing, Wenzhou, Zhejiang, China
Copyright © 2025 CNC ELECTRIC GROUP CO.,LTD. All Rights Reserved.
Hot Products - TOP BLOG - TOP SEARCH
Hot Products - TOP BLOG - TOP SEARCH
-
Send Email
-
Whatsapp
-
Top