New Energy Manufacturers | China New Energy Factory & Suppliers - Part 3

Product Category

YCF8-1038 (1451 2258)

General
The variable cross-section melt made of pure silver sheet (or silver wire winding)is soldered with low-temperature tin and packaged in afusion tube made of high- strength porcelain.The fusion tube is flled with chemically treated and specially processed Process-treated high-purity quartz sand isused as the arc-extinguishing medium,and the two ends of the melt are firmly electrically connected with the contacts byelectric welding
YCF8-1085 1485

General
The variable cross-section melt made of pure silver sheet (or siver wire winding)is soldered with low-temperature tin and packaged in a fusion tube made of high- strength porcelain.The fusion tube is filled with chemically treated and specially processed Process-treated high-purity quartz sand isused as the arc-extinguishing medium,and the two ends of the melt are firmly electrically connected with the contacts byelectric welding.
YCRP-15C Rapid Shutdown Device

The component-level rapid shutdown PLC control box is a device that cooperates with the component-level fire rapid shutdown actuator to form the photovoltaic DC side quick shutdown system, and the device conforms to the American National Electrical Code NEC2017&NEC2020 690.12 for rapid shutdown of photovoltaic power stations.

The specification requires that the photovoltaic system on all buildings, and the circuit beyond 1 foot (305 mm) from the photovoltaic module array, must drop to below 30 V within 30 seconds after the rapid shutdown start; The circuit within 1 foot (305 mm) from the PV module array must drop to below 80V within 30 seconds after the fast shutdown start. The circuit within 1 foot (305 mm) from the PV module array must drop to below 80V within 30 seconds after the rapid shutdown start.
YCRP Rapid Shutdown Switch

Rapid shutdown switch YCRP series is a cost-effective rapid shutdown device; through one-button operation, the DC high voltage is limited to the roof or near the components, and in case of fire and other emergency situations, the personal safety of rescuers is protected to a certain extent to avoid electric shock accidents.

Shutdown when ambient temperature exceeds 85℃;

Ultra-thin size perfectly matches the module;

Flame retardant grade: UL94-V0;

Protection grade: IP68;

Meet UL standard and SUNSPEC protocol;

PLC control optional;

Hook design, convenient and simple installation, saving labor costs.
Photovoltaic Miniature Circuit Breaker DC MCB YCB8-125PV

General

The rated operating voltage of YCB8-125PV series DC miniature circuit breakers can reach DC1000V, and the rated operating current can reach 125A, which are used for isolation, overload and short circuit protection. It is widely used in photovoltaic, industrial, civil, communication and other systems, and can also be used in DC systems to ensure the reliable operation of DC systems.

Standard: IEC/EN 60947-2.
Photovoltaic Miniature Circuit Breaker YCB8s-63PV DC MCB (polarity)

General

YCB8s-63PV photovoltaic dedicated DC circuit breaker is mainly used in solar photovoltaic power generation systems. The maximum working voltage can reach DC1200V, and the rated current is up to 63A. It is used for overload and short circuit protection of the line, and can quickly cut off the fault current of the DC distribution system, protecting the important components in the solar power generation system – photovoltaic modules from the harm of DC side reverse current and AC side feedback current caused by inverter faults, ensuring the reliable operation of the solar photovoltaic power generation system.

Standards:IEC60947-2
DC isolator switch solar isolator YCIS8-55

General

Isolating switch YCIS8 series is suitable for DC power systems with rated voltage DC1500V and below and rated current 55A and below. This product is used for infrequent on/off, and can disconnect 1~4 MPPT lines at the same time.

It is mainly used in control cabinets, distribution boxes, inverters and combiner boxes in photovoltaic power generation systems for isolation of DC power distribution systems.

The external waterproof performance of this product reaches IP66. The inner core of the product can be installed inside the inverter for controlling the incoming line of the inverter.

Standards: IEC/EN60947-3, AS60947.3, UL508i standards.

Certification: TUV, CE, CB, SAA, UL, CCC.
Off-grid Energy Storage Inverter YCDPO-II

The YCDPO-II is a dedicated off-grid inverter tailored for independent solar energy systems. It efficiently converts DC from batteries or solar panels into AC, powering appliances in areas without grid access. input voltage range to 450V, output AC pure sine wave AC230V 50/60HZ, can drive 1.6~6KW single-phase load.

1. Pure sine wave MPPT solar inverter Bulit-in 80/120A MPPT solar charger

2. YCDPO II series is suitable for off-grid and on grid(optional) applications.

3. Battery equalization function extend life cycle Reserved communication port(RS485,-CAN) for BMS

4. High PV input voltage range With touch buttons Two outputs for smart load management (4/6KW OPT)
Hybrid Grid Energy Storage Inverter YCDPO-I

YCDPO-I is a versatile hybrid inverter designed for grid-tied solar energy systems with storage. It integrates solar panels, batteries, and the utility grid, ensuring seamless energy management and backup during outages., input voltage range DC60~450V, output AC pure sine wave AC230V 50/60HZ, can drive 4~11KW single-phase load.

1. Built-in two MPPT(6KW-11kW).with wide PV input range:60-450VDC

2. Configurable AC/PV output usage time and prioritization

3. YCDPO I senes is suitable for on & off-grid applications

4. Battery egualization function extend life cycleReserved communicatonportRS485,CAN) for BMS

5. Parallel operation up to 6 units

6. Communication WiFi or bluetooth Touchable button with large 5” colorful LCD
YCX8p-IFS/MFS

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
YCX8-BFS PV Box(Fuse&MCB&SPD)

1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln
PvT-P DC1500

PvT-P Photovoltaic Connector (Board-end type)

<< < 1 2 3 4 5 6 > >> 3 / 6

Send Email

Send Email

cncele@cncele.com
Whatsapp

Whatsapp

+86 18958711903
Top