-
YCQ9E Automatic transfer switchGeneral
YCQ9E series automatic transfer switch, rated working curent 16A to 630A,to be used in pow- er systems for ensuring the continuity of the supply, by transfering a load between two power supply sources. The switch has three working posions of “Main ( I ) cosing”, “Standby ( II )
closing” and “Double-of (0)”, which can be used for fire-fighting linkage and infrequent con-
necion and disconnecion of power supply systems. Mainly used in hospitals, shopping malls, banks, chemical industy, metalurgy, high-rise buildings, military facilities and fire-fighting occa- sions where power failure is not allowed.
Standards: IEC 60947-6-1 -
YCW3 Air Circuit BreakerGeneral
YCW3 series air circuit breakerthereinafter calledACB)issuitable for the circuitof AC50Hz/60Hz with ratedservicevoltage 400V,690V and ratedservicecurrent between200A and 6300A.Itis mainly used to distribute electric energy and protect circuitsand electric equipment against over-load,under-voltage,short-circuit and singlephase earthingfault. -
YCQ9Ms Automatic transfer switchGeneral
YCQ9Ms series dual power automatic transfer switch is suitable for power supply system with AC 50/60Hz, rated working voltage AC400V, rated working current 800A and below.It is possible to select and switch between two power sources according to requirements, ensuring uninterrupted operation of key power sources. When one power supply has overvoltage, undervoltage or phase loss, it will automaticallyswitch to another power supply or start the generator.Built-in RS485 communication interface, communication protocol MODBUS-RTU, realize real-time data upload, remote data configuration and status monitoring, as well as remote control, telemetry, remote control and remote adjustment functions.Mainly used in hospitals, shopping malls, banks, hotels, high-rise buildings, fire protection and other places that do not allow long-term power outages with uninterrupted power supply required.1. Can work in the environment of -5°C~40°C2. The altitude of the installation site does not exceed 2000m3. When the highest temperature is +40°C, the relative humidity of the air should notexceed 50%4. Higher humidity is allowed at lower temperature, 20°C~90%Standard: IEC 60947-6-1 -
YCM3T/A Molded Case Circuit BreakerGeneralOperating conditionsYCM3 Series moulded case circuit breaker, is new products, with small compact, modular, high break, double breakpoints, zero arcing, green environmental protection. Suitable for AC 50Hz, 60Hz, rated operating voltage 690V and below, rated current 12.5A to 1600A distribution network, used to distribute electrical energy and protection lines and power supply equipment from overload, short circuit and undervoltage failure hazards. It can also be used as a non-frequent conversion of the line under normal conditions and in the infrequent start of the motor. -
YCM3 Series moulded case circuit breakerYCM3 Series moulded case circuit breaker,is new products,with small compact, modular,high break,double breakpoints,zero arcing,green environmen protection.Suitable for AC 50Hz,60Hz,rated operating voltage 690V and below, rated current 12.5A to 1600A distribution network,used to distribute electrical energy and protection lines and power supply equipment from overload,short circuit and undervoltage failure hazards.It can also be used as a non-frequent conversion of the line under normal conditions and in the infrequent start of the motor.
-
YCQ9 16A-630A PC class Automatic transfer switchYCQ9 series automatic transfer switch is suitable for AC 50Hz, rated working voltage AC400V, rated operating current up to 630A three-phase four-wire dual-circuit power supply grid, automatically connect one or several load circuits from one power supply to another to ensure load normal power supply of the circuit.This product is suitable for industrial, commercial, high-rise and residential buildings, etc.more important places.Standard: IEC 60947-6 -
YCM1 Molded Case Circuit BreakerGeneral
YCM1 series moulded case circuit breaker(herein after called circuit breaker) adopts international advanced design and manufactural technology, it can be divided into L-type (standard type), M-type (higher type)according to the rated ultimate short circuit breaking capacity (Icu). With the features of small and compact, high breaking capacity, short arcing-over distance, anti-vibration, the circuit breaker is used popularly on land and marine products, which are applied for the power distribution network of AC 50Hz,rated insulation voltage 800V (YCM1-63 to 500V), rated working voltage 690V(YCM1-63 to 400V) and below, rated current up to 1600A. It can be used to distribute electric power and protect power equipment against overload, short circuit, undervoltage etc, It also takes protective effect when motors infrequently start and protects against overload, short circuit and lacking voltage. In the series, frame ranging from 63-630A three-pole product also comes with a transparent cover, it is convenient for customers to observe the product operation.The circuit breaker can be installed vertically, or horizontally.Standard : IEC60947-2. -
YCM7 Series MCCBGeneral
YCM7, YCM7RT, YCM7T/A, YCM7RE series circuit breaker is a new generation of breaker. This breaker is applied for the distribution network of AC 50Hz, rated insulation voltage 800V, rated working current up to 800A, which is for electric energy distribution, circuit protection, protection power supply facility from destroying by the fault of overloading, short circuit and undervoltage, meanwhile it is also used for protection from unfrequent starting, over loading, short circuit and undervoltage of the motor.
-
YCS1 Automatic Transfer Switch1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln -
YCM8N Series MCCBYCM8N Series circuit breakers are developed according to domestic and international market demand, as well as similar products.
Its rated insulation voltage is up to 1000V, suitable for AC 50-60Hz distribution network circuit whose rated operation voltage is up to 690V, rated operation current from 10A to 630A. It can distribute power, protect the circuit and power supply devices from the damage of overload,short circuit and under voltage, etc.
This series of circuit breaker is featured as high breaking capacity and short arcing. It can be installed vertically (namely vertical installation) and also installed horizontally (namely horizontal installation).
Standards: IEC60947-2.
-
YCQ9B-63 Automatic transfer switch（CB class)This series of Automatic transfer switch is suitable for AC 50Hz/60Hz, rated working voltage 230V/400V and below power distribution and control circuit.The current up to 63A. It is mainly used as the main switch of terminal electrical appliances, and can also be used to control various types of motors, low-power electrical appliances,lighting and other places.
Standard:IEC60947-6-1
-
YCM8E Electronic Addjustable Circuit BreakerGeneralYCM8E series electronic circuit breakers are applicable for low-voltage power systems of AC 50Hz, rated operating voltage up to1000V and rated operating current from 16A to 800A.
-
-
-
Address：No. 146-148 Xinguang Avenue, Xinguang Industrial Zone, Liushi Town, Yueqing, Wenzhou, Zhejiang, China
Hot Products - TOP BLOG - TOP SEARCH
-
Send Email
-
Whatsapp
-
Top