-
YCM8T/A,RT Thermomagnetic Adjustable MCCBYCM8T/A,RT Thermomagnetic Adjustable MCCB -
YCM8-HU Photovoltaic AC MCCBGeneralYCM8-HU series AC molded case circuit breaker is suitable for AC grid circuits with rated voltage up to AC1140V and rated current of 800A.The circuit breaker has the functions of overload long-time delay protection and short-circuit instantaneous protection, and is used to distribute electric energy and protect lines and power supply equipment from overload, short circuit and other faults. -
YCM3LE Leakage MCCBYCM3 Series moulded case circuit breaker,is new products,with small compact, modular,high break,double breakpoints,zero arcing,green environmer protection.
Suitable for AC50Hz,60Hz,rated operating voltage 690V and below, rated current 125A to 1600A distribution network,used to distribute electrical energy and protection lines and powersupply equipment from overload,short circuit and undervoltage failure hazards.
It can also be used as a non-frequent conversion of the line under normal conditions and in theinfrequentstart of the motor
-
YCM3Y Molded Case Circuit Breaker(Electronic)YCM3 Series moulded case circuit breaker,is new products,with small compact, modular,high break,double breakpoints,zero arcing,green environmental protection.
Suitable for AC 50Hz,60Hz,rated operating voltage 690V and below, rated current 125A to 1600A distribution network,used to distribute electrical energy and protection lines and power supply equipment from overload,short circuit and undervoltage failure hazards.
It can also be used as a non-frequent conversion of the line under normal conditions and in the infrequent start of the motor.
-
YCX8 Series DC Combiner Box1. Overload protection
2. Short circuit protection
3. Controlling
4. Used in residential building, non-residential building, energy source industry and infrastructure.
5. According to the type of instantaneous release classified as follows : type B(3-5)ln, type C(5-10)ln, type D(10-20)ln -
YCM7YV MCСBGeneralYCM7YV series electronic plastic case circuit breaker (hereinafter referred to as: circuit breaker) is suitable for low-voltage power grids with AC 50Hz, rated insulation voltage 800V, rated operating voltage 400V and below, and rated operating current up to 800A.The circuit breaker has overload long-delay inverse time limit, short-circuit short-delay inverse time limit, short-circuit short-delay fixed time limit, short-circuit instantaneous and under-voltage protection functions. Under normal circumstances, the circuit breaker is used for infrequent switching of circuits and infrequent starting of motors.This series of circuit breakers has isolation function, and its correspondingsymbol isStandard: IEC60947-2. -
YCM8YV Series MCCB AccessoriesGeneralThe rated insulation voltage of YCM8YV series electronic liquid crystal molded case circuit breakeris 1000V. It is suitable for the distribution network with AC 50Hz, rated voltage of 400V and below and rated current up to 800A.Under normal circumstances,the circuit breaker can be used for infrequent switching of circuits and infrequent starting of motors.It can protect the circuits from overload and short circuit, as well as over-voltage, under-voltage and phase loss.Standards:IEC60947-2 -
ATS220 ControllerGeneral
ATS220 is one controller with YCQ4 ATS system of Mains and genset power,which can
control the YCQ4 ATS switch by auto or manual mode to apply for mains and gens power.It is with 4 digits LED tube which can display the single-phase gens voltage, gens frequency, mains voltage, mains frequency. YCQ4 ATS switch working status can be also shown by
LED.
All the parameters can be set through the front face buttons or PC port. -
ISBox-Z1 Series Isolation switch boxGeneral
ISBox-Z1 series conversion isolation switch box adopts YCHGLZ1 conversion isolation switch, with standard configuration of two in and one out, installed with a bottom plate, and operated outside the cabinet.
-
CJX2-F-N Mechanical Interlocking ContactorCJX2-F-N Mechanical Interlocking Contactor -
CJ19s Contactor for Capacitor SwitchingCj19i contactor for capacitor switching (hereinafter called contactor)is suitable for the circuit of AC 50Hz/60Hz with rated voltage upto690V.It is mainly used to add low voltage reactive power compensation equipment or cut off low voltage parallel capacitor.
The contactor is equipped with a device to suppress the inrush current, which can effectively reduce the impact of the making inrush current on the capacitor and suppress the over-voltage when the capacitor is cut off. Standard:IEC/EN 60947-4-1.
-
CJ40 AC ContactorGeneralCj40 series AC contactor is mainly used for remote making & breaking circuits in power lines with AC 50Hz (or 60Hz), rated working voltage up to 690V (or 1140V),rated working current up to 1250A, and protect circuit from overload when assembling with thermal over-load relay or electronic protection device.Standard: IEC 60947-4-1
-
-
-
Address：No. 146-148 Xinguang Avenue, Xinguang Industrial Zone, Liushi Town, Yueqing, Wenzhou, Zhejiang, China
Hot Products - TOP BLOG - TOP SEARCH
-
Send Email
-
Whatsapp
-
Top