General
YCH7-125 series isolating switch is suitable in the resistive circuit of AC 50/60HZ,rated voltage 230/400V,rated current up to 125A.
It’s used primarily for circuit’s turning on or off in non-loadedsituation.And it functions on connection and isolation between lines and power,especially suitable to isolate power effectively and prevent circuit breaker from closing acidentally when maintain the circuit in order to ensure the safe operation of maintainer.
Standard:IEC600947-3

General
1.Protection against overload and short-circuit currents
2.Protection against the effects ofsinusoidal alternating earthfault currents
3.Protection against indirectcontacts and additional protection against direct contacts.
4.Protection against fire hazard caused by insulation faults
5.Used in residential building
6.According tothe type of instantaneous release classified as follows:type B(3-5)In,type C(5-10)In,type D(10-20)In

Function

1.  Personnel and fire protection

2.  Cable and line protection against overload and short-circuits.

Selection

1.  I∆n ≤ 30 mA: additional protection in the case of direct contact.

2.  I∆n ≤300 mA: preventative fire protection in the case of ground fault currents.

3.  AC class – Tripping is ensured for sinusoidal, alternating currents, whether they be quickly applied or slowly increase.

The CNC Wall Switch & Socket series is a collection of wall switches and socket products specifically designed for the U.S. market. Featuring modern designs and outstanding functionality, these products are suitable for residential, commercial, and industrial environments. Each product complies with the strict electrical standards in the U.S., offering efficient, safe, and easy-to-install solutions. Whether for home or office use, CNC’s wall switches and sockets provide stable power connections, ensuring electrical safety.

YCDPO-III is a versatile hybrid inverter designed for grid-tied solar energy systems with storage. It integrates solar panels, batteries, and the utility grid, ensuring seamless energy management and backup during outages.  input voltage range DC60~450V, output AC pure sine wave AC230V 50/60HZ, can drive 4~11KW single-phase load.

YCDPO-V is a dedicated off-grid inverter tailored for independent solar energy systems. It efficiently converts DC from batteries or solar panels into AC, powering appliances in areas without grid access. the input voltage range is 115V, the output AC pure sine wave AC230V 50/60HZ, can drive 1.2~5KW single-phase load.

YCW9X-1600 integrated circuit breaker is one of the new circuit breakers developed using advanced technology. This product is suitable for general distribution systems, new energy distribution systems, multi-energy distribution networks, inverters and distributed power rotation. It has isolation function, small size, high breaking capacity and other multi-functional features for grid-connected operation and protection of motor power supplies.

YCS7N series Surge Protection Device (SPD) is suitable for TT, IT, TN-S, TN-C and TN-C-S, the power supply system with the rated voltage up to 230/400V and AC 50/60Hz. Its design corresponds to IEC61643-1. The product is usually installed in the incoming line low voltage distribution box of the building, and it can release 80kA lightning stroke current.

In order to satisfy the demands of various pumping applications, YCB2000PV solar pump controller adopts Max Power Point Tracking and proven motor drive technology to maximize output from solar modules. It supports both single phase or three-phase AC input such as a generator or inverter from battery. The controller provides fault detection, motor soft start, and speed control. YCB2000PV controller is designed to proceed these features with the plug and play, ease of installation.

YCM6, YCM6RT series circuit breaker is a new generation of breaker.

This breaker is applied for the distribution network of AC 50/60Hz, rated insulation voltage 800V, rated working current up to 800A, which is for electric energy distribution, circuit protection, protecting power supply facility from being destroyed by the fault of overloading, short circuit and undervoltage. And it is also used for protecting, overloading, short circuit and undervoltage of the motor.

This breaker has such characteristics as high short circuit interrupting capacity, shortarcing and etc., which is a ideal product for users. This breaker can be installed vertically or hori-zontally.

Standard:lEC60947-2