1. Enter the gateway network configuration mode (host mode), the sub- device indicator light flashes blue, and enters the network configuration state;

2. Press the sub-device network configuration button to configure the network. The sub-device indicator light flashes red when the current sub-device is successfully paired;

3. Pair sub-devices one by one;

4. After all sub-devices are paired, press the gateway “Menu” button to confirm, exit the network configuration mode, and the network configuration is completed

5. Scan the code using APP to add a device

Wi-Fi product interface and network configuration instructions

Interface and network configuration instructions for PE products

Installation and wiring

Installation dimensions

Product Installation

1. The device is suitable for standard 35mm rail installation. When installing, just snap the device into the rail and fix it with the buckle

2. According to the actual power distribution management and line laying design requirements,select and use the IoT modules and electrical box specifications that meet the needs, and install them in the order of the modules shown in the figure. Each module is connected with a 2PIN data cable specially made by the manufacturer.

3. The circuit breaker should be installed vertically. When the handle is in "/OFF", the contacts are in the disconnected state. When the handle

moves upward, the contacts move in the closing direction;

4. The nominal cross-sectional area of the copper wire used for connection that matches the rated current of the circuit breaker is shown in the table below.

Transportation and storage

Transportation

During the transportation of products, they should be protected from the invasion and mixing of water, rain, snow or other harmful liquids such as chemical solvents and corrosive liquids; strong collision and extrusion between objects should be prevented;

they should be stacked according to the direction indicated on the packaging, and the number of stacking layers can be seen from the outer box of the packaging.

Storage

● Storage environment conditions: ambient temperature -10°C~+45°C;

● Relative humidity ≤90% (when ambient temperature is +20°C);

● The storage location should be dust-free and conductive dust-free;

● No corrosive, flammable and explosive gases, no rain or snow invasion;

● Dry and well ventilated;

● Stack in the direction indicated on the package,and do not stack higher than the number marked on the outer packaging box.

Product use and precautions

1. This product has RS485 as a standard communication port, which can be connected to computers and other communication devices through.

2. RS485 to USB converter to achieve information exchange and control.

3. The default baud rate of the device is 9600bps, and the required baud rate can be viewed and set through the PC.

4. Product installation and commissioning must be carried out by professional electricians.

5. This product can be customized according to user needs, please contact relevant technicians for details.